汽车挡风玻璃修补胶
一, 名称:汽车风挡玻璃修复液套装(Visbella Quick Dry Adhesive Windshield Repair PART# SKG-285)
修复液 1x2ml
不干胶 2片
注塑头 1个
针筒 1支
固化膜 3片
刀片 1个
毛巾 1块
Kit Contains
Other Information
1* 2ml Repair Resin
2* Adhesive Seal
1* Pedestal
2* Curing Film
1* Razor Blade
1* Injector with Spring Clip
1* Cleaning Cloth
1* Push Pin
1* Instruction Sheet
Chemical Type
Repair Resin
Ooor
Mild
Specific Gravity
1.04
Flash Point, TCC
>150℉
Measure (cm)
48 pcs/carton. Carton Size: 47.5x33.0x23.0
Net Weight
3.0kgs
Gross Weight
4.0 kgs
HTB142J.KpXXXXaaXXXXq6xXFXXXLHTB1O_tUKpXXXXbIXpXXq6xXFXXXk
二,使用范围:(
对所有类型的汽车前挡风玻璃的修复,包括裂纹,星状,牛眼状, 石子撞击等。
(The kit that meets every windshield technicians needs to be able to really repair all star breaks, bullseye breaks, combination breaks,
chips, cracks, etc. Minimizes the appearance, and stops the spread of chips and cracks.)
HTB1AUGsIFXXXXbvapXXq6xXFXXXM
二,产品特点:(Product Attribute)
拥有*特的抽真空设计,产生数陪的负压抽取破损部位的空气,其*特的密封注胶头设计以及加压设计确保修复树脂*有效进入裂纹.
(Windshield Repair Kit is very handy to help you to repair the broken windshield in just 20 minutes.This kit will minimize the
appearance and stop the spread of chips and cracks in your windshield. It removes air from the break, fills it with durable resin and
makes it even stronger than before. For best results, repairs should be made as soon as possible after the damage occurs and before
the break is contaminated by dirt or water.)
三,使用步骤:( How to use it)
1、将裂纹中的碎玻璃渣清理干净,取出不干胶,在玻璃裂纹处贴上定位贴,不干胶中心孔要对准破损的中心点
2、贴上注塑头,为了抽真空时不漏气,注塑头与不干胶之间盖住不能有缝
3、取修复液,从注塑头加注,直至填充满整个注胶头
4、换下修复液,取针筒旋进注塑头(针筒推杆推至较下面),将针筒往上拉抽成真空,在较下面一个卡口处卡住,保持10分钟,
5、针筒取下,将推杆往外拉至较,再针筒旋进注塑口,推杆往下推入卡在上面的卡口处保持10分钟。
6、10分钟之后用刀片把不干胶轻轻刮去
7、取一片固化膜,并同时取修复液滴入玻璃用固化膜盖住,使膜与玻璃间充满修复液,过多的修复液要用刀片轻轻挤掉
8、拿掉固化膜之后,用刀片轻轻刮去残留的胶。将车移到太阳下暴晒10-20分钟,使之固化。
HTB1rrJFKpXXXXcZXVXXq6xXFXXX5
四,使用挡风玻璃修复套装的注意事项:(Precautions)
1、洗车后请不要修复
2、阴雨天及晚上不要修复
3、切勿在烈日下修复
Avoid eye contact. Do not get on skin or clothing.
Avoid breathing of vapors. Use only with adequate ventilation.
Do not swallow.
Wash thoroughly after handling. Close container after each use. Products shall be ideally stored in a cool, dry location in unopened containers at a temperature between 8
and 28℃(46 and 82℉) unless otherwise labeled. Optimal storage is at the lower half of this temperature range.
To prevent contamination of unused product, do not return any material to its original container.
五、生产流程(Production Line)
HTB1rvl9KpXXXXaYXXXXq6xXFXXXw
六、证书(Certificates)
拥有注册商标“Visbella”“goodfo',通过了iso9001质量体系认证。通过了SGS,RoHs、BSCI、MSDS等认证。请放心质量。
Having registered trademark of ' Visbella', we also have passed ISO9001:2000 quality system authentication.
All of our products are well approved by SGS, Reach, RoHs, BSCI, MSDS etc. Please be rest assured about the quality.
HTB1iHhLKpXXXXXvXpXXq6xXFXXXA
HTB1wtxvKpXXXXcTXFXXq6xXFXXXd